JUKI MF-7523 Three Needle Top and Bottom Flat Bed Coverstitch Sewing Machine
|MACHINE DESCRIPTION:||The machine can be used for the hemming process of the sleeves and bottoms of T-shirts and for the covering process for sportswear and knitwear. The front cover is trimmed to allow operators to bring their hands closer near the needle entry area, thereby increasing work efficiency in the covering process, etc.
The machine comes set-up with 3 needles for top and bottom cover stitching, however, you can remove the middle needle and sew two rows up top and cover on the bottom.
The Juki MF-7500 series state-of-the-art machine has been designed through a thorough ongoing study of seam quality. The machine is provided as standard with a great diversity of easily adjusted features to increase applicable types of sewing products. The well-balanced design of the machine achieves low-vibration and low-noise operation even under high-speed mode.
Seams can be adjusted depending on the application or material by changing the thread path or adjusting the thread tension controller, to produce soft and low-tensed seams for inner wear or to produce high-grade well-tensed seams for outer wear.
The optimized thread take-up mechanism and top covering thread path route contribute to an increased stability of top covering stitches. In addition, the machine is capable of performing sewing with a low tension applied to the thread to offer improved responsiveness to the sewing thread.
A differential-feed adjustment mechanism with a micro-adjustment mechanism to provide a constant differential-feed ratio. The differential-feed amount can be easily adjusted to the best suited value for the material to be used.
The machine comes with a variety of features to increase applicable types of sewing products.
Since the front and rear feed dogs are synchronized, the differential- feed ratio is constant, requiring no additional adjustment, even when the stitch length is changed.
Adjustment of the feed dog inclination can be carried out from outside with ease. The feed dog inclination adjustment mechanism works effectively to secure the material being sewn in place with increased reliability and thereby preventing uneven material feed and puckering.
The micro-lifter keeps the presser foot in a slightly raised position during sewing to help prevent problems such as slippage and deformation, or damages that can easily occur when sewing elastic materials.
The looper thread cam comes provided with a thread twining prevention mechanism.
Even if the thread twines around the looper thread cam, the cam can be easily detached for removal of the thread.
The well-balanced design of the machine achieves low-vibration and low-noise operation even under the high-speed mode.
This enables the operator to concentrate on sewing work in a more comfortable environment.
The machine is designed to use gauge components which are similar to commercially available ones.
This machine ships complete and fully assembled - ready to sew upon arrival.
|MOTOR & VOLTAGE:||This machine is equiped with a SERVO motor operating on standard 110 Volts power.|
|WARRANTY:||1 Year Warranty|
Commercial / Business Address = $195.00
Home / Residential Address = $260.00
|DELIVERY TIME:||In stock. 4 to 5 days delivery window.|
|PARTS MANUAL:||Printed copy comes with the machine|